Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-07 16:53:05
From: Brian Conway
Description: resflash 7.6.0 OpenBSD 7.6-release amd64 ODROID-H3
OpenBSD 7.6 (GENERIC.MP) #0: Wed Sep 25 22:24:30 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8410963968 (8021MB)
avail mem = 8132784128 (7756MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x78d74000 (140 entries)
bios0: vendor American Megatrends Inc. version "5.19" date 09/21/2024
bios0: HARDKERNEL ODROID-H3
efi0 at bios0: UEFI 2.7
efi0: American Megatrends rev 0x50013
acpi0 at bios0: ACPI 6.2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG FIDT SSDT SSDT SSDT HPET APIC PRAM SSDT SSDT NHLT LPIT SSDT SSDT DBGP DBG2 SSDT DMAR SSDT TPM2 WSMT FPDT
acpi0: wakeup devices PEGP(S4) PEGP(S4) PEGP(S4) PEGP(S4) SIO1(S3) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xc0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2893.74 MHz, 06-9c-00, patch 24000026
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=47f8ebbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND>
cpu0: cpuid 6 eax=178ff7<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=2394a2c3<FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA> ecx=18400124<UMIP,WAITPKG> edx=fc000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=5, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=101<LAHF,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=14020c6b<IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,GDS_NO,RFDS_CLEAR>
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2893.74 MHz, 06-9c-00, patch 24000026
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2694.17 MHz, 06-9c-00, patch 24000026
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2394.82 MHz, 06-9c-00, patch 24000026
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PC00)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP06)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus -1 (RP09)
acpiprt9 at acpi0: bus -1 (RP10)
acpiprt10 at acpi0: bus -1 (RP11)
acpiprt11 at acpi0: bus -1 (RP12)
acpiprt12 at acpi0: bus -1 (RP13)
acpiprt13 at acpi0: bus -1 (RP14)
acpiprt14 at acpi0: bus -1 (RP15)
acpiprt15 at acpi0: bus -1 (RP16)
acpiprt16 at acpi0: bus -1 (RP17)
acpiprt17 at acpi0: bus -1 (RP18)
acpiprt18 at acpi0: bus -1 (RP19)
acpiprt19 at acpi0: bus -1 (RP20)
acpiprt20 at acpi0: bus -1 (RP21)
acpiprt21 at acpi0: bus -1 (RP22)
acpiprt22 at acpi0: bus -1 (RP23)
acpiprt23 at acpi0: bus -1 (RP24)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
"ACPI000E" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00193c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev 0x0
acpipwrres0 at acpi0: WRST
acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpipwrres1 at acpi0: FN00, resource for FAN0
acpipwrres2 at acpi0: FN01, resource for FAN1
acpipwrres3 at acpi0: FN02, resource for FAN2
acpipwrres4 at acpi0: FN03, resource for FAN3
acpipwrres5 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpipwrres6 at acpi0: PIN_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
acpivout1 at acpivideo0: DD2F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2001, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel Jasper Lake Host" rev 0x00
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01
drm0 at inteldrm0
inteldrm0: msi, JASPERLAKE, gen 11
"Intel Jasper Lake DPTF" rev 0x00 at pci0 dev 4 function 0 not configured
"Intel Jasper Lake GNA" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Jasper Lake xHCI" rev 0x01: msi, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Jasper Lake Shared SRAM" rev 0x01 at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0 "Intel Jasper Lake I2C" rev 0x01: apic 2 int 16
iic0 at dwiic0
dwiic1 at pci0 dev 21 function 1 "Intel Jasper Lake I2C" rev 0x01: apic 2 int 17
iic1 at dwiic1
"Intel Jasper Lake HECI" rev 0x01 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel Jasper Lake AHCI" rev 0x01: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT0> naa.5002538e19a4df9d
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
sdhc0 at pci0 dev 26 function 0 "Intel Jasper Lake eMMC" rev 0x01: apic 2 int 16
sdhc0: SDHC 3.00, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
ppb0 at pci0 dev 28 function 0 "Intel Jasper Lake PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
rge0 at pci1 dev 0 function 0 "Realtek RTL8125" rev 0x05: msix, address [_MAC_XXXXXXXXXX]
ppb1 at pci0 dev 28 function 1 "Intel Jasper Lake PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
rge1 at pci2 dev 0 function 0 "Realtek RTL8125" rev 0x05: msix, address [_MAC_XXXXXXXXXX]
ppb2 at pci0 dev 28 function 4 "Intel Jasper Lake PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
nvme0 at pci3 dev 0 function 0 "Samsung PM991 NVMe" rev 0x00: msix, NVMe 1.4
nvme0: Samsung SSD 980 1TB, firmware 3B4QFXO7, serial S64ANL0TB16610W
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, Samsung SSD 980, 3B4Q>
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
pcib0 at pci0 dev 31 function 0 "Intel Jasper Lake eSPI" rev 0x01
azalia0 at pci0 dev 31 function 3 "Intel Jasper Lake HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC1200, Intel/0x281a, using Realtek ALC1200
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel Jasper Lake SMBus" rev 0x01: apic 2 int 16
iic2 at ichiic0
"Intel Jasper Lake SPI" rev 0x01 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
sdmmc0: can't enable card
uchcom0 at uhub0 port 3 configuration 1 interface 0 "QinHeng Electronics USB2.0-Ser!" rev 1.10/2.54 addr 2
uchcom0: CH341
ucom0 at uchcom0: usb0.0.00003.0
uplcom0 at uhub0 port 4 configuration 1 interface 0 "Prolific Technology Inc. USB-Serial Controller" rev 2.00/3.00 addr 3
ucom1 at uplcom0: usb0.0.00004.0
umass0 at uhub0 port 9 configuration 1 interface 0 "SanDisk USB Extreme Pro" rev 3.00/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <SanDisk, Extreme Pro, 0> removable serial.0781558853345678C93B
sd2: 122112MB, 512 bytes/sector, 250085376 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd3: 953867MB, 512 bytes/sector, 1953520544 sectors
root on sd2d (7af0e1434f194117.d) swap on sd2b dump on sd2b
drm:pid24741:dmc_load_work_fn *NOTICE* [drm] Failed to load DMC firmware i915/icl_dmc_ver1_09.bin. Disabling runtime power management.
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
hw.machine=amd64
hw.model=Intel(R) Celeron(R) N5105 @ 2.00GHz
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:437356b29de17b3b,sd1:e4b35d972e440496,sd2:7af0e1434f194117,sd3:171bdd147ed3344a
hw.diskcount=4
hw.sensors.cpu0.temp0=55.00 degC
hw.sensors.cpu0.frequency0=2500000000.00 Hz
hw.sensors.cpu1.frequency0=2550000000.00 Hz
hw.sensors.cpu2.frequency0=2850000000.00 Hz
hw.sensors.cpu3.frequency0=2650000000.00 Hz
hw.sensors.acpitz0.temp0=27.80 degC (zone temperature)
hw.sensors.nvme0.temp0=57.00 degC, OK
hw.sensors.nvme0.percent0=1.00% (endurance used), OK
hw.sensors.nvme0.percent1=100.00% (available spare), OK
hw.sensors.softraid0.drive0=online (sd3), OK
hw.cpuspeed=2001
hw.setperf=100
hw.vendor=HARDKERNEL
hw.product=ODROID-H3
hw.version=1.0
hw.serialno=Default string
hw.uuid=0000001e-0645-022a-0101-001e0645022b
hw.physmem=8410963968
hw.usermem=8410869760
hw.ncpufound=4
hw.allowpowerdown=1
hw.perfpolicy=high
hw.smt=0
hw.ncpuonline=4
hw.power=1
hw.ucomnames=ucom0:usb0.0.00003.0,ucom1:usb0.0.00004.0