Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-06 09:39:52
From: gsp
Description: FreeBSD/amd64 on HP ProLiant ML350p Gen8
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p5 GENERIC amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(vga): resolution 640x480 module_register: cannot register pci/ciss from kernel; already loaded from ciss.ko Module pci/ciss failed to register: 17 CPU microcode: updated from 0x718 to 0x71a CPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz (2394.11-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 51539607552 (49152 MB) avail memory = 50054823936 (47736 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20221020/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20221020/tbfadt-850) ioapic1 <Version 2.0> irqs 24-47 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 2 3 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf4f40-0xf4f5e smbios0: Version: 2.8, BCD Revision: 2.8 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <HP ProLiant> acpi0: Power Button (fixed) acpi0: _OSC failed: AE_BUFFER_OVERFLOW cpu0: <ACPI CPU> numa-domain 0 on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 apei0: <ACPI Platform Error Interface> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci0 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci0 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 ciss0: <HP Smart Array P420i> port 0x5000-0x50ff mem 0xfbf00000-0xfbffffff,0xfbef0000-0xfbef03ff irq 34 at device 0.0 numa-domain 0 on pci5 ciss0: PERFORMANT Transport pcib6: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci0 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci0 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci0 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci0 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci0 pci10: <ACPI PCI bus> numa-domain 0 on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 17.0 numa-domain 0 on pci0 pci11: <ACPI PCI bus> numa-domain 0 on pcib11 ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfac60000-0xfac603ff irq 21 at device 26.0 numa-domain 0 on pci0 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib12: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 pci12: <ACPI PCI bus> numa-domain 0 on pcib12 pcib13: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0 pci13: <ACPI PCI bus> numa-domain 0 on pcib13 pci0:2:0:0: error accessing writeable VPD data bge0: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5719001> mem 0xfabf0000-0xfabfffff,0xfabe0000-0xfabeffff,0xfabd0000-0xfabdffff irq 16 at device 0.0 numa-domain 0 on pci13 bge0: APE FW version: NCSI v1.3.16.0 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: <MII bus> numa-domain 0 on bge0 brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] pci0:2:0:1: error accessing writeable VPD data bge1: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5719001> mem 0xfabc0000-0xfabcffff,0xfabb0000-0xfabbffff,0xfaba0000-0xfabaffff irq 17 at device 0.1 numa-domain 0 on pci13 bge1: APE FW version: NCSI v1.3.16.0 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: <MII bus> numa-domain 0 on bge1 brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: [_MAC_XXXXXXXXXX] pci0:2:0:2: error accessing writeable VPD data bge2: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5719001> mem 0xfab90000-0xfab9ffff,0xfab80000-0xfab8ffff,0xfab70000-0xfab7ffff irq 16 at device 0.2 numa-domain 0 on pci13 bge2: APE FW version: NCSI v1.3.16.0 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: <MII bus> numa-domain 0 on bge2 brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Using defaults for TSO: 65518/35/2048 bge2: Ethernet address: [_MAC_XXXXXXXXXX] pci0:2:0:3: error accessing writeable VPD data bge3: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5719001> mem 0xfab60000-0xfab6ffff,0xfab50000-0xfab5ffff,0xfab40000-0xfab4ffff irq 17 at device 0.3 numa-domain 0 on pci13 bge3: APE FW version: NCSI v1.3.16.0 bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus3: <MII bus> numa-domain 0 on bge3 brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge3: Using defaults for TSO: 65518/35/2048 bge3: Ethernet address: [_MAC_XXXXXXXXXX] pcib14: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci0 pci14: <ACPI PCI bus> numa-domain 0 on pcib14 vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbde0000-0xfbde3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 numa-domain 0 on pci14 vgapci0: Boot video device uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 numa-domain 0 on pci14 usbus1 numa-domain 0 on uhci0 usbus1: 12Mbps Full Speed USB v1.0 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfac50000-0xfac503ff irq 20 at device 29.0 numa-domain 0 on pci0 usbus2: EHCI version 1.0 usbus2 numa-domain 0 on ehci1 usbus2: 480Mbps High Speed USB v2.0 pcib15: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 pci15: <PCI bus> numa-domain 0 on pcib15 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 atapci0: <Intel Patsburg SATA600 controller> port 0x4000-0x4007,0x4008-0x400b,0x4010-0x4017,0x4018-0x401b,0x4020-0x402f,0x4030-0x403f irq 17 at device 31.2 numa-domain 0 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 atapci1: <Intel Patsburg SATA300 controller> port 0x4040-0x4047,0x4048-0x404b,0x4050-0x4057,0x4058-0x405b,0x4060-0x406f,0x4070-0x407f irq 17 at device 31.5 numa-domain 0 on pci0 ata4: <ATA channel> at channel 0 on atapci1 ata5: <ATA channel> at channel 1 on atapci1 acpi_tz0: <Thermal Zone> on acpi0 ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ns8250: UART FCR is broken uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0 est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 Timecounter "TSC-low" frequency 1196999896 Hz quality 1000 Timecounters tick every 1.000 msec ipmi0: IPMI device rev. 2, firmware rev. 2.82, version 2.0, device support mask 0x8f ugen2.1: <Intel EHCI root HUB> at usbus2 ugen1.1: <HP UHCI root HUB> at usbus1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0 numa-domain 0 on usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1 numa-domain 0 on usbus1 uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub2 numa-domain 0 on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ipmi0: Number of channels 1 ipmi0: Attached watchdog ipmi0: Establishing power cycle handler Trying to mount root from ufs:/dev/da0s1a [rw]... uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: CAM usbus0 usbus2 ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub3 numa-domain 0 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub4 numa-domain 0 on uhub2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 Root mount waiting for: CAM usbus0 usbus2 uhub4: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen2.3: <vendor 0x0424 product 0x2660> at usbus2 uhub5 numa-domain 0 on uhub3 uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus2 Root mount waiting for: CAM usbus2 uhub5: 2 ports with 1 removable, self powered da0 at ciss0 bus 0 scbus0 target 0 lun 0 da0: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXX] da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 953837MB (1953459632 512 byte sectors) da1 at ciss0 bus 0 scbus0 target 1 lun 0 da1: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXXXXX] da1: 135.168MB/s transfers da1: Command Queueing enabled da1: 1907697MB (3906963632 512 byte sectors) da2 at ciss0 bus 0 scbus0 target 2 lun 0 da2: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device da2: [_SERIAL_NUMBER_XXXXXXXXXXXX] da2: 135.168MB/s transfers da2: Command Queueing enabled da2: 1907697MB (3906963632 512 byte sectors) da3 at ciss0 bus 0 scbus0 target 3 lun 0 da3: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device da3: [_SERIAL_NUMBER_XXXXXXXXXXXX] da3: 135.168MB/s transfers da3: Command Queueing enabled da3: 1907697MB (3906963632 512 byte sectors) da4 at ciss0 bus 0 scbus0 target 4 lun 0 da4: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device da4: [_SERIAL_NUMBER_XXXXXXXXXXXX] da4: 135.168MB/s transfers da4: Command Queueing enabled da4: 1907697MB (3906963632 512 byte sectors) cd0 at ata2 bus 0 scbus3 target 1 lun 0 cd0: <hp DVDROM DH41N S100> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ioat0: <SNB IOAT Ch0> mem 0xfacf0000-0xfacf3fff irq 31 at device 4.0 numa-domain 0 on pci0 ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat1: <SNB IOAT Ch1> mem 0xface0000-0xface3fff irq 39 at device 4.1 numa-domain 0 on pci0 ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat2: <SNB IOAT Ch2> mem 0xfacd0000-0xfacd3fff irq 31 at device 4.2 numa-domain 0 on pci0 ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat3: <SNB IOAT Ch3> mem 0xfacc0000-0xfacc3fff irq 39 at device 4.3 numa-domain 0 on pci0 ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat4: <SNB IOAT Ch4> mem 0xfacb0000-0xfacb3fff irq 31 at device 4.4 numa-domain 0 on pci0 ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat5: <SNB IOAT Ch5> mem 0xfaca0000-0xfaca3fff irq 39 at device 4.5 numa-domain 0 on pci0 ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat6: <SNB IOAT Ch6> mem 0xfac90000-0xfac93fff irq 31 at device 4.6 numa-domain 0 on pci0 ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat7: <SNB IOAT Ch7> mem 0xfac80000-0xfac83fff irq 39 at device 4.7 numa-domain 0 on pci0 ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> lo0: link state changed to UP bge0: link state changed to DOWN bge2: link state changed to DOWN