Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-05 10:51:50
From: tingo
Description: FreeBSD/amd64 on Asus M5A78L/USB3
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.3-RELEASE-p7 GENERIC amd64 FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367) VT(vga): resolution 640x480 CPU: AMD Phenom(tm) II X4 965 Processor (3415.51-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x100f43 Family=0x10 Model=0x4 Stepping=3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant real memory = 34359738368 (32768 MB) avail memory = 33367629824 (31821 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <042713 APIC1118> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20201113/tbfadt-748) ioapic0 <Version 2.1> irqs 0-23 Launching APs: 1 3 2 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xfbf40-0xfbf5e smbios0: Version: 2.5 aesni0: No AES or SHA support. acpi0: <042713 XSDT1118> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeac0000-0xfeadffff irq 18 at device 0.0 on pci1 vgapci0: Boot video device hdac0: <ATI RV910 HDA Controller> mem 0xfeaf8000-0xfeafbfff irq 19 at device 0.1 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 16 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfebf8000-0xfebfffff irq 19 at device 0.0 on pci3 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe9ffc00-0xfe9fffff irq 22 at device 17.0 on pci0 ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fe000-0xfe9fefff irq 16 at device 18.0 on pci0 usbus1 on ohci0 usbus1: 12Mbps Full Speed USB v1.0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fd000-0xfe9fdfff irq 16 at device 18.1 on pci0 usbus2 on ohci1 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe9ff800-0xfe9ff8ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fc000-0xfe9fcfff irq 18 at device 19.0 on pci0 usbus4 on ohci2 usbus4: 12Mbps Full Speed USB v1.0 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fb000-0xfe9fbfff irq 18 at device 19.1 on pci0 usbus5 on ohci3 usbus5: 12Mbps Full Speed USB v1.0 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe9ff400-0xfe9ff4ff irq 19 at device 19.2 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 usbus6: 480Mbps High Speed USB v2.0 atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 hdac1: <ATI SB600 HDA Controller> mem 0xfe9f4000-0xfe9f7fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci4: <ACPI PCI bus> on pcib4 ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fa000-0xfe9fafff irq 18 at device 20.5 on pci0 usbus7 on ohci4 usbus7: 12Mbps Full Speed USB v1.0 acpi_button0: <Power Button> on acpi0 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. psm0: model IntelliMouse Explorer, device ID 4 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounter "TSC-low" frequency 1707666957 Hz quality 800 Timecounters tick every 1.000 msec hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1 ugen0.1: <(0x1b21) XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen6.1: <ATI EHCI root HUB> at usbus6 ugen4.1: <ATI OHCI root HUB> at usbus4 ugen7.1: <ATI OHCI root HUB> at usbus7 uhub1 on usbus4 ugen3.1: <ATI EHCI root HUB> at usbus3 uhub2 on usbus7 uhub3 on usbus6 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 uhub4 on usbus3 uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen1.1: <ATI OHCI root HUB> at usbus1 ugen5.1: <ATI OHCI root HUB> at usbus5 uhub5 on usbus1 ugen2.1: <ATI OHCI root HUB> at usbus2 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub6 on usbus2 uhub7 on usbus5 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 Trying to mount root from ufs:/dev/ada2p5 [rw]... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SanDisk SDSSDH2128G X211200> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <Crucial CT240M500SSD1 MU03> ACS-2 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXX] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 228936MB (468862128 512 byte sectors) ada2: quirks=0x2<NCQ_TRIM_BROKEN> cd0 at ata0 bus 0 scbus6 target 0 lun 0 cd0: <Optiarc DVD RW AD-5170A 1.12> Removable CD-ROM SCSI device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present uhub2: 2 ports with 2 removable, self powered uhub5: 3 ports with 3 removable, self powered uhub6: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub7: 3 ports with 3 removable, self powered uhub0: 4 ports with 4 removable, self powered Root mount waiting for: usbus3 usbus6 Root mount waiting for: usbus3 usbus6 uhub3: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered ugen3.2: <vendor 0x05e3 USB2.0 Hub> at usbus3 uhub8 on uhub4 uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus3 Root mount waiting for: usbus3 uhub8: 4 ports with 4 removable, self powered ugen3.3: <vendor 0x05e3 USB2.0 Hub> at usbus3 uhub9 on uhub8 uhub9: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 3> on usbus3 Root mount waiting for: usbus3 uhub9: 4 ports with 4 removable, self powered aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0 aibs0: v0: 0x06020000 Vcore Voltage 850 / 1600 aibs0: v1: 0x06020001 +3.3 Voltage 2970 / 3630 aibs0: v2: 0x06020002 +5 Voltage 4500 / 5500 aibs0: v3: 0x06020003 +12 Voltage 10200 / 13800 aibs0: t0: 0x06030000 CPU Temperature 600 / 950 aibs0: t1: 0x06030001 MB Temperature 450 / 750 aibs0: f0: 0x06040000 CPU FAN Speed 600 / 7200 aibs0: f1: 0x06040001 CHASSIS FAN Speed 600 / 7200 Cuse v0.1.37 @ /dev/cuse [drm] radeon kernel modesetting enabled. drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] initializing kernel modesetting (CAICOS 0x1002:0x677B 0x1462:0x8099 0x00). [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO ATOM BIOS: 113 drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [drm] Detected VRAM RAM=1024M, BAR=256M [drm] RAM width 64bits DDR [TTM] Zone kernel: Available graphics memory: 16758204 KiB [TTM] Zone dma32: Available graphics memory: 2097152 KiB [TTM] Initializing pool allocator [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 1024M of GTT memory ready. [drm] Loading CAICOS Microcode drmn0: successfully loaded firmware image 'radeon/CAICOS_pfp.bin' drmn0: successfully loaded firmware image 'radeon/CAICOS_me.bin' drmn0: successfully loaded firmware image 'radeon/BTC_rlc.bin' drmn0: successfully loaded firmware image 'radeon/CAICOS_mc.bin' drmn0: successfully loaded firmware image 'radeon/CAICOS_smc.bin' [drm] Internal thermal controller with fan control [drm] radeon: dpm initialized drmn0: successfully loaded firmware image 'radeon/SUMO_uvd.bin' [drm] GART: num cpu pages 262144, num gpu pages 262144 [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). drmn0: WB enabled drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 drmn0: radeon: MSI limited to 32-bit drmn0: radeon: using MSI. [drm] radeon: irq initialized. [drm] ring test on 0 succeeded in 2 usecs [drm] ring test on 3 succeeded in 7 usecs [drm] ring test on 5 succeeded in 2 usecs [drm] UVD initialized successfully. [drm] ib test on ring 0 succeeded in 0 usecs [drm] ib test on ring 3 succeeded in 0 usecs [drm] ib test on ring 5 succeeded lkpi_iicbb0: <LinuxKPI I2CBB> on drmn0 iicbb0: <I2C bit-banging driver> on lkpi_iicbb0 iicbus0: <Philips I2C bus> on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 lkpi_iicbb1: <LinuxKPI I2CBB> on drmn0 iicbb1: <I2C bit-banging driver> on lkpi_iicbb1 iicbus1: <Philips I2C bus> on iicbb1 addr 0xff iic1: <I2C generic I/O> on iicbus1 lkpi_iicbb2: <LinuxKPI I2CBB> on drmn0 iicbb2: <I2C bit-banging driver> on lkpi_iicbb2 iicbus2: <Philips I2C bus> on iicbb2 addr 0xff iic2: <I2C generic I/O> on iicbus2 lkpi_iicbb3: <LinuxKPI I2CBB> on drmn0 iicbb3: <I2C bit-banging driver> on lkpi_iicbb3 iicbus3: <Philips I2C bus> on iicbb3 addr 0xff iic3: <I2C generic I/O> on iicbus3 lkpi_iicbb4: <LinuxKPI I2CBB> on drmn0 iicbb4: <I2C bit-banging driver> on lkpi_iicbb4 iicbus4: <Philips I2C bus> on iicbb4 addr 0xff iic4: <I2C generic I/O> on iicbus4 lkpi_iicbb5: <LinuxKPI I2CBB> on drmn0 iicbb5: <I2C bit-banging driver> on lkpi_iicbb5 iicbus5: <Philips I2C bus> on iicbb5 addr 0xff iic5: <I2C generic I/O> on iicbus5 lkpi_iicbb6: <LinuxKPI I2CBB> on drmn0 iicbb6: <I2C bit-banging driver> on lkpi_iicbb6 iicbus6: <Philips I2C bus> on iicbb6 addr 0xff iic6: <I2C generic I/O> on iicbus6 lkpi_iicbb7: <LinuxKPI I2CBB> on drmn0 iicbb7: <I2C bit-banging driver> on lkpi_iicbb7 iicbus7: <Philips I2C bus> on iicbb7 addr 0xff iic7: <I2C generic I/O> on iicbus7 [drm] Radeon Display Connectors [drm] Connector 0: [drm] HDMI-A-1 [drm] HPD1 [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY1 [drm] Connector 1: [drm] DVI-D-1 [drm] HPD4 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY [drm] Connector 2: [drm] VGA-1 [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] fb mappable at 0xD0363000 [drm] vram apper at 0xD0000000 [drm] size 9216000 [drm] fb depth is 24 [drm] pitch is 7680 VT: Replacing driver "vga" with new "fb". start FB_INFO: type=11 height=1200 width=1920 depth=32 pbase=0xd0363000 vbase=0xfffff800d0363000 name=drmn0 flags=0x0 stride=7680 bpp=32 end FB_INFO [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 intsmb0: intr SMI enabled revision 0 intsmb0: using polling mode when configured interrupt is SMI smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP