NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2024-05-04 04:04:46
From: extrowerk
Description: Radxa Zero 3W

OpenBSD 7.5 (GENERIC.MP) #138: Wed Mar 20 19:42:15 MDT 2024
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 8317808640 (7932MB)
avail mem = 7976288256 (7606MB)
random: boothowto does not indicate good seed
mainbus0 at root: Radxa ZERO 3
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.10
efi0: Das U-Boot rev 0x20231000
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "latest-2023.10-9-eed05a18-geed05a18" date 10/01/2023
smbios0: Unknown Unknown Product
cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0
cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0
cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0
cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
scmi0 at mainbus0: SCMI 2.0
apm0 at mainbus0
agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: "interrupt-controller"
syscon0 at syscon"
rkiovd0 at syscon0
syscon1 at mainbus0: "syscon"
syscon2 at mainbus0: "syscon"
syscon3 at mainbus0: "syscon"
syscon4 at mainbus0: "syscon"
syscon5 at mainbus0: "syscon"
syscon6 at mainbus0: "syscon"
rkclock0 at mainbus0: PMUCRU
rkclock1 at mainbus0: CRU
syscon7 at mainbus0: "power-management"
"power-controller" at syscon7 not configured
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainqos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "qos"
syscon26 at mainbus0: "qos"
syscon27 at mainbus0: "qos"
syscon28 at mainbus0: "qos"
syscon29 at mainbus0: "qos"
syscon3t mainbus0: "qos"
syscon31 at mainbus0: "qos"
rkcomphy0 at mainbus0
rkusbphy0 at mainbus0: ph 0
rkusbphy1 at mainbus0: phy 1
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
"fit-images" at mainbus0 not configured
"opp-table-0" at mainbus0 not configured
rkdrm0 at mainbus0
drm0 at rkdrm0
"firmware" at mainbus0 not configured
"opp-table-1" at mainbus0 not configured
dio0 at mainbus0
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
"xin32k" at mainbus0 not configured
"sram" at mainbus0 not configured0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 ahciat mainbus0rkcomphy0: timeout
, xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr
ehci0 at mainbus0
usb2 at ehci0: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr
ohci0 at mainbus0: version 1.0
ehci1 at mainbus0
usb3 at ehci1: USB revision 2.0
uhub3 at usb3 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr
ohci1 at mainbus0: version 1.0mainbus0
iic0 at rkiic0
fanpwr0 at iic0 addr 0x40: SYR827, 0.90 VDC
rkpmic0 at iic0 addr 0x20: RK817
"gpu" at mainbus0 not configured
"video-codec" at mainnfigured
"iommu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma
dwmmc1 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma
"spi" at mainbus0 not configured
dwmshc0 at mainbus0
dwmshc0: SDH20, 200 MHz base clock
sdmmc2 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
"dma-contr at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"watchdog" at mainbus0 not configured
com0 at mainbus0: dw16550, 64 byte fifo
com1 at mainbus0: dw16550, 64 byte fifo
com1: console
rktemp0 at mainbus0
"saradc" at mainbus0 not configured
"hdmi-con" at mainbus0 not configured
gpioleds0 at mainbus0: no LEDs
"sdio-pwrseq" at mainbus0 not configured
"vcc-1v8-regulator" at mainbus0 not configured
"vcc-3v3-regulator" at mainbus0 not configured
"vcc5v0-sys" at mainbus0 not configured
"vcc-sys-regulator" at mainbus0 not configured
"vcca-1v8-gulator" at mainbus0 not configured
"vcca1v8-image-regulator" at mainbus0 not configured
"vdda0v9-image-regulator" at mainbus0 not configured
"binman" at mainbus0 not configured
"config" at mainbus0 not configured
"dmc" at mainbus0 not configured
"nvmem" at mainbus0 not configured
usb4 at ohci0: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr
usb5 at ohci1: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr
scsibus0 at s 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable
sd0: 14910MB, 512 bytes/sector, 30535680
manufacturer 0xc8a1, product 0x0082 at sdmmcfunction 1 not configured
manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 2 not configured
scsibus1 at sdmmc2: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Samsung, CUTB42, 0000>
sd1: 59640MB, 512 bytes/sector, 122142720 ectors
umass0 at uhub1 port 2 configuration 1 interface 0 "UnionSine MD202" rev 3.20/20.01 dr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <, UnionSine MD202, 1.00> serial.0bda9210012345679672
sd2: 244198MB, 512 bytes/sector, 500118192 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targeot on sd2a (581506009ef574aa.a) swap on sd2b dump ond2b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
rkdrm0: no display interface ports configured
zero# 

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.