Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-03-02 01:57:44
From: eradman
Description: Juniper SRX300 (OCTEON CN7020-AAP)
Allocating memory for ELF segment: addr: 0xffffffff81000000 (adjusted to: 0x1000000), size 0x87c370
## Loading big-endian Linux kernel with entry point: 0xffffffff81000000 ...
Bootloader: Done loading app on coremask: 0x1
Starting cores:
0x1
bootmem desc 0x6c108 version 3.0
avail phys mem 0x0000000000100300 - 0x0000000000fffc50
avail phys mem 0x000000000187c370 - 0x000000000f100000
avail phys mem 0x000000000f100010 - 0x000000000f101908
avail phys mem 0x000000000f101910 - 0x000000000fffdc00
avail phys mem 0x0000000020000000 - 0x000000010f000000
Total DRAM Size 0x0000000100000000
mem_layout[0] page 0x0000000000000041 -> 0x00000000000003FF
mem_layout[1] page 0x0000000000000620 -> 0x0000000000003C40
mem_layout[2] page 0x0000000000003C41 -> 0x0000000000003FFFInitial setup done, switching console.
boot_desc->desc_ver:7
boot_desc->desc_size:400
boot_desc->stack_top:0
boot_desc->heap_start:0
boot_desc->heap_end:0
boot_desc->argc:1
boot_desc->flags:0x5
boot_desc->core_mask:0x1
boot_desc->dram_size:4096
boot_desc->phy_mem_desc_addr:0
OpenBSD 7.4 (RAMDISK) #1402: Tue Oct 10 10:10:56 MDT 2023
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/octeon/compile/RAMDISK
real mem = 4294967296 (4096MB)
avail mem = 4230316032 (4034MB)
random: boothowto does not indicate good seed
mainbus0 at root: board 1423 rev 1.8, model cavium,evb7000
cpu0 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1200 MHz, CN70xx/CN71xx FPU rev 0.0
cpu0: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
clock0 at mainbus0: int 5
iobus0 at mainbus0
simplebus0 at iobus0: "soc"
"bootbus" at simplebus0 not configured
octciu0 at simplebus0
octcib0 at simplebus0: failed to register interrupt
octcib1 at simplebus0: failed to register interrupt
octcib2 at simplebus0: failed to register interrupt
octcib3 at simplebus0: failed to register interrupt
octcib4 at simplebus0: failed to register interrupt
octcib5 at simplebus0: failed to register interrupt
octcib6 at simplebus0: failed to register interrupt
octgpio0 at simplebus0: 20 pins, xbit 16
octsmi0 at simplebus0
octpip0 at simplebus0
octgmx0 at octpip0 interface 0: no active ports found
octgmx1 at octpip0 interface 1: no active ports found
octgmx2 at octpip0 interface 4
cnmac0 at octgmx2: port 24 AGL, address [_MAC_XXXXXXXXXX]
ukphy0 at cnmac0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x000020, model 0x0000
ifmedia_set: no match for 0x100/0xffffffffffffffff
"i2c" at simplebus0 not configured
"i2c" at simplebus0 not configured
com0 at simplebus0: ns16550a, 64 byte fifo
com0: console
com1 at simplebus0: ns16550a, 64 byte fifo
com1: probed fifo depth: 0 bytes
"spi" at simplebus0 not configured
octsctl0 at simplebus0
ahci0 at octsctl0: can't establish interrupt
octxctl0 at simplebus0: DWC3 rev 0x250a
xhci0 at octxctl0: can't establish interrupt
octxctl1 at simplebus0: DWC3 rev 0x250a
xhci1 at octxctl1: can't establish interrupt
"dma-engine" at simplebus0 not configured
"dma-engine" at simplebus0 not configured
octpcie0 at iobus0: 3 ports
pci0 at octpcie0 bus 0
vendor "Broadcom", unknown product 0x8343 (class network subclass ethernet, rev 0x01) at pci0 dev 0 function 0 not configured
octpcie0 port 1: link timeout
octpcie0 port 2: reset timeout
octrtc0 at mainbus0: DS1337
root on rd0a swap on rd0b dump on rd0b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T