NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2024-02-11 13:30:44
From: Ken Wellsch
Description: OpenBSD 7.4R/sparc64 on Sunfire V245

Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 7.4 (GENERIC.MP) #1898: Tue Oct 10 09:20:21 MDT 2023
    [_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 8589934592 (8192MB)
avail mem = 8423079936 (8032MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Fire V245
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xbc
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xbc
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
rtc0 at ebus0 addr 70-73: m5823
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-W28SLC, 1.0C> removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xbc: msi
pci4 at ppb3 bus 6
ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xbc: msi
pci5 at ppb4 bus 7
ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xbc
pci6 at ppb5 bus 8
ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci7 at ppb6 bus 9
bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x795, address [_MAC_XXXXXXXXXX]
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address [_MAC_XXXXXXXXXX]
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci8 at ppb7 bus 10
ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xbc
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci10 at ppb9 bus 12
bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address [_MAC_XXXXXXXXXX]
brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x797, address [_MAC_XXXXXXXXXX]
brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci11 at ppb10 bus 13
mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
mpi0: SAS1064, firmware[_IP_XX]
scsibus2 at mpi0: 63 targets
sym0 at scsibus2 targ 0 lun 0: <FUJITSU, MAY2073RCSUN72G, 0401> naa.500000e01243d440
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAY2073RCSUN72G, 0401> naa.500000e01243d440
sd0: 70007MB, 512 bytes/sector, 143374738 sectors
sd1 at scsibus2 targ 1 lun 0: <HITACHI, H101473SCSUN72G, SA23> naa.5000cca0002d64ac
sd1: 70007MB, 512 bytes/sector, 143374738 sectors
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
pyro1: dvma map c0000000-ffffffff
pci12 at pyro1
ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci13 at ppb11 bus 3
ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci14 at ppb12 bus 4
mpi1 at pci14 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: msi
mpi1: 0, firmware[_IP_XXX]
scsibus3 at mpi1: 16 targets, initiator 7
cd1 at scsibus3 targ 4 lun 0: <ZULUSCSI, CDROM, 2.0> removable serial.ZULUSCSICDROM_B1816376
cd2 at scsibus3 targ 5 lun 0: <ZULUSCSI, CDROM, 2.0> removable serial.ZULUSCSICDROM_B1816376
cd3 at scsibus3 targ 6 lun 0: <ZULUSCSI, CDROM, 2.0> removable serial.ZULUSCSICDROM_B1816376
mpi1: target 4 Async at 0MHz width 8bit offset 15 QAS 0 DT 0 IU 0
mpi1: target 5 Async at 0MHz width 8bit offset 15 QAS 0 DT 0 IU 0
mpi1: target 6 Async at 0MHz width 8bit offset 15 QAS 0 DT 0 IU 0
mpi2 at pci14 dev 1 function 1 "Symbios Logic 53c1030" rev 0x08: msi
mpi2: 0, firmware[_IP_XXX]
scsibus4 at mpi2: 16 targets, initiator 7
ebus1 at mainbus0
"flashprom" at ebus1 addr 0-1fffff not configured
com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo
"rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured
"gpio" at ebus1 addr c0-c0 not configured
led0 at ebus1 addr 0-80: rev 0x5a
power0 at ebus1 addr 40-c1 ivec 0x7c3
"i2c" at mainbus0 not configured
uhub3 at uhub2 port 1 configuration 1 interface 0 "Atmel Standard USB Hub" rev 1.10/3.00 addr 2
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0
root on sd0a (e6de80f9f34f81cc.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (e6de80f9f34f81cc.a): file system is clean; not checking
/dev/sd0k (e6de80f9f34f81cc.k): file system is clean; not checking
/dev/sd0d (e6de80f9f34f81cc.d): file system is clean; not checking
/dev/sd0f (e6de80f9f34f81cc.f): file system is clean; not checking
/dev/sd0g (e6de80f9f34f81cc.g): file system is clean; not checking
/dev/sd0h (e6de80f9f34f81cc.h): file system is clean; not checking
/dev/sd0j (e6de80f9f34f81cc.j): file system is clean; not checking
/dev/sd0i (e6de80f9f34f81cc.i): file system is clean; not checking
/dev/sd0e (e6de80f9f34f81cc.e): file system is clean; not checking
pf enabled
starting network
reordering: ld.so libc libcrypto sshd.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Sun Feb 11 08:18:05 EST 2024

OpenBSD/sparc64 (v245.localhost) (console)

login:

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.