NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2023-12-17 07:42:07
From: extrowerk
Description: HINLINK LinkStar OPC-H68K

OpenBSD 7.4 (GENERIC.MP) #2273: Tue Oct 10 09:45:06 MDT 2023
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 3989172224 (3804MB)
avail mem = 3787907072 (3612MB)
random: good seed from bootblocks
mainbus0 at root: HINLINK OPC-H68K Board
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.7
efi0: EDK2 rev 0x10000
smbios0 at efi0: SMBIOS 3.3.0
smbios0: vendor EDK2 version "miq" date 12/16/2023
smbios0: Firefly Firefly ROC-RK3568-PC
cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0
cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu1: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0
cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu2: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0
cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
cpu3: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS
scmi0 at mainbus0: SCMI 2.0
apm0 at mainbus0
agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: "interrupt-controller"
syscon0 at mainbus0: "syscon"
rkiovd0 at syscon0
syscon1 at mainbus0: "syscon"
syscon2 at mainbus0: "syscon"
syscon3 at mainbus0: "syscon"
syscon4 at mainbus0: "syscon"
syscon5 at mainbus0: "syscon"
syscon6 at mainbus0: "syscon"
rkclock0 at mainbus0: PMUCRU
rkclock1 at mainbus0: CRU
syscon7 at mainbus0: "power-management"
"power-controller" at syscon7 not configured
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "qos"
syscon26 at mainbus0: "qos"
syscon27 at mainbus0: "qos"
syscon28 at mainbus0: "qos"
syscon29 at mainbus0: "qos"
syscon30 at mainbus0: "qos"
syscon31 at mainbus0: "qos"
rkcomphy0 at mainbus0
rkcomphy1 at mainbus0
rkusbphy0 at mainbus0: phy 0
rkusbphy1 at mainbus0: phy 1
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
syscon32 at mainbus0: "syscon"
syscon33 at mainbus0: "qos"
syscon34 at mainbus0: "qos"
syscon35 at mainbus0: "qos"
syscon36 at mainbus0: "syscon"
rkpciephy0 at mainbus0
rkcomphy2 at mainbus0
"fit-images" at mainbus0 not configured
"opp-table-0" at mainbus0 not configured
"display-subsystem" at mainbus0 not configured
"firmware" at mainbus0 not configured
"opp-table-1" at mainbus0 not configured
simpleaudio0 at mainbus0
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
"xin32k" at mainbus0 not configured
"sram" at mainbus0 not configured
xhci0 at mainbus0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
ehci0 at mainbus0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at mainbus0: version 1.0
ehci1 at mainbus0
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at mainbus0: version 1.0
rkiic0 at mainbus0
iic0 at rkiic0
fanpwr0 at iic0 addr 0x1c: TCS4525, 1.15 VDC
rkpmic0 at iic0 addr 0x20: RK809
rkpwm0 at mainbus0rkclock_get_frequency(rkclock0, 13)
: no clock
"gpu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"rga" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
dwqe0 at mainbus0 gmac 1: rev 0x00, address [_MAC_XXXXXXXXXX]
rgephy0 at dwqe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
dwpcie0 at mainbus0
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
dwmshc0 at mainbus0
dwmshc0: SDHC 4.20, 200 MHz base clock
sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
"i2s" at mainbus0 not configured
"i2s" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
rkiic1 at mainbus0
iic1 at rkiic1
"watchdog" at mainbus0 not configured
com0 at mainbus0: dw16550, 64 byte fifo
rktemp0 at mainbus0
"saradc" at mainbus0 not configured
ahci0 at mainbus0: AHCI 1.3
scsibus0 at ahci0: 32 targets
dwpcie1 at mainbus0
dwpcie2 at mainbus0
dwqe1 at mainbus0 gmac 0: rev 0x00, address [_MAC_XXXXXXXXXX]
rgephy1 at dwqe1 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
rkrng0 at mainbus0: ver 2
"hdmi-con" at mainbus0 not configured
gpiokeys0 at mainbus0: "reset"
gpioleds0 at mainbus0: no LEDs
"vcc12v-dcin" at mainbus0 not configured
"vcc3v3-sys" at mainbus0 not configured
"vcc5v0-sys" at mainbus0 not configured
"vcc5v0-usb" at mainbus0 not configured
"vcc5v0-usb-host" at mainbus0 not configured
"vcc3v3-pcie" at mainbus0 not configured
simpleaudio1 at mainbus0
pwmfan0 at mainbus0
simplefb0 at mainbus0: 1280x720, 32bpp
wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
pci0 at dwpcie0
ppb0 at pci0 dev 0 function 0 "Rockchip RK3566" rev 0x00
pci1 at ppb0 bus 1
"Intel WiFi Link 1030" rev 0x1a at pci1 dev 0 function 0 not configured
pci2 at dwpcie1
ppb1 at pci2 dev 0 function 0 "Rockchip RK3566" rev 0x00
pci3 at ppb1 bus 1
rge0 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address [_MAC_XXXXXXXXXX]
pci4 at dwpcie2
ppb2 at pci4 dev 0 function 0 "Rockchip RK3566" rev 0x00
pci5 at ppb2 bus 1
rge1 at pci5 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address [_MAC_XXXXXXXXXX]
scsibus1 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <SD/MMC, NCard, 0010> removable
sd0: 14910MB, 512 bytes/sector, 30535680 sectors
sdmmc1: can't enable card
sdhc_sdclk_frequency_select: command in progress
umass0 at uhub0 port 2 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075e2a041c
sd1: 29340MB, 512 bytes/sector, 60088320 sectors
urtwn0 at uhub2 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev 2.10/2.00 addr 2
urtwn0: MAC/BB RTL8192EU, RF 6052 2T2R, address [_MAC_XXXXXXXXXX]
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Dell Dell KB216 Wired Keyboard" rev 2.00/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1 "Dell Dell KB216 Wired Keyboard" rev 2.00/1.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 2: 573 usages, 20 keys, array
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (d9b3f31cd079d97e.a) swap on sd1b dump on sd1b

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.