Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2023-10-24 22:10:13
From: grillo
Description: ROCK64 RK3328 OpenBSD 7.4 arm64
OpenBSD 7.4 (GENERIC.MP) #2273: Tue Oct 10 09:45:06 MDT 2023
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 4223426560 (4027MB)
avail mem = 4012503040 (3826MB)
random: good seed from bootblocks
mainbus0 at root: Pine64 Rock64
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20210100
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "2021.01+dfsg-3" date 03/01/2021
smbios0: pine64 rock64_rk3328
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 256KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 256KB 64b/line 16-way L2 cache
cpu1: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 256KB 64b/line 16-way L2 cache
cpu2: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 256KB 64b/line 16-way L2 cache
cpu3: CRC32,SHA2,SHA1,AES+PMULL,ASID16
apm0 at mainbus0
syscon0 at mainbus0: "syscon"
"io-domains" at syscon0 not configured
"grf-gpio" at syscon0 not configured
"power-controller" at syscon0 not configured
"reboot-mode" at syscon0 not configured
rkclock0 at mainbus0
syscon1 at mainbus0: "syscon"
"usb2-phy" at syscon1 not configured
ampintc0 at mainbus0 nirq 160, ncpu 4 ipi: 0, 1, 2: "interrupt-controller"
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
"opp_table0" at mainbus0 not configured
simplebus0 at mainbus0: "bus"
"dmac" at simplebus0 not configured
"arm-pmu" at mainbus0 not configured
rkdrm0 at mainbus0
drm0 at rkdrm0
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
"i2s" at mainbus0 not configured
"spdif" at mainbus0 not configured
com0 at mainbus0: dw16550, 64 byte fifo
com0: console
rkiic0 at mainbus0
iic0 at rkiic0
rkpmic0 at iic0 addr 0x18: RK805
"spi" at mainbus0 not configured
"watchdog" at mainbus0 not configured
rktemp0 at mainbus0
"efuse" at mainbus0 not configured
"gpu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
"codec" at mainbus0 not configured
"phy" at mainbus0 not configured
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma
dwmmc1 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma
dwge0 at mainbus0: rev 0x35, address [_MAC_XXXXXXXXXX]
rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
ehci0 at mainbus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at mainbus0: version 1.0
"usb" at mainbus0 not configured
"external-gmac-clock" at mainbus0 not configured
"sdmmc-regulator" at mainbus0 not configured
"vcc-host-5v-regulator" at mainbus0 not configured
"vcc-host1-5v-regulator" at mainbus0 not configured
"vcc-sys" at mainbus0 not configured
"ir-receiver" at mainbus0 not configured
gpioleds0 at mainbus0: no LEDs
graphaudio0 at mainbus0
"spdif-dit" at mainbus0 not configured
"dmc" at mainbus0 not configured
"usb" at mainbus0 not configured
"smbios" at mainbus0 not configured
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, DA4032, 0000> removable
sd0: 29820MB, 512 bytes/sector, 61071360 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (2abfdbad14790c60.a) swap on sd0b dump on sd0b
rkdrm0: no display interface ports configured